NOVOFLEX PANORAMA VR-SYSTEM 6/8
The Specialist: VR-System 6/8
Optimised for fisheye lenses the new VR-System 6/8 enables horizontal and vertical rotation around the nodal point of the lens with two click-stop-panorama bases.
Increments of 45° and 60° each, as well as stepless rotation can be set up. If the images are taken at every second click-stop, additional increments of 90° and 120° are possible.
The system is sized to allow a complete vertical rotation of the camera. Each panning base is construced very small and equipped with an integrated spirit-level, so it doesn´t intrude into the picture.
Thanks to the milled-out portion of the L-bracket the spirit-level can be seen from above. The front locking screw can be removed and is only needed in case of
Due to its size and stability of the head a professional D-SLR camera can be used.
The upper panorama base slides in the guide rail of the L-bracket, making additional adjustments of the base unnecessary when changing the height. Both bases are equipped with click-stops and include a space-saving built-in spirit-level. The locking screws are removable if needed.
The Panorama VR-System 6/8 is the solution for photographers specialised in spherical panoramas for internet applications, virtual tours etc. The utilisation of a fisheye lens reduces the number of required images for a complete spherical panorama (360° x 180°) to three to eight images (depending on the focal distance and the crop factor). Thus, a high-quality result can be achieved quickly and efficiently.
Scope of delivery:
- Panorama base PANORAMA=Q 6/8
- Panorama base PANORAMA=VR
- L-bracket QPL VR-PRO
- clamping plate QPL-PANORAMA,
- spirit-level for flash shoe VR-WAAGE
- printed manual
Suitable lenses: Fisheye, super wide-angle lenses on full-format cameras
Adjustment in optical axle: 150 mm
Image reproduction: Single and multi row
Panorama type: Spherical projections and other projection types derived from it
Recommended software: PTGui, Photoshop
Weight: 1230 g (2.1 lbs)
Camera/tripod fitting: 1/4” resp. 3/8” / 1/4”
MADE IN GERMANY